Provider Of Dewatering Pumps
in Pumping Industry Since 50 Yrs
ISO 9001:2015, CE, IP 68
| Suction Connection | 200 mm / 8 inch |
|---|---|
| Delivery Connection | 200 mm / 8 inch |
| Solid Handling | 75 mm / 3 inch |
| Max. Head / Max. Flow | 55 mtr / 800 m3/hr |
| Engine Bell Housing | SAE3 / SAE1 |
| Engine Fly Wheel | 10 inch / 14 inch |
| Shaft Diameter | 70 mm |
| Max. Impeller Diameter | 295 mm |
| Priming | 60 CFM / 800 RPM |
| Best Efficiency Point | |
| Head and Flow | 38 mtr / 550 m3/hr |
| STANDARDS | MATERIAL | STANDARDS | MATERIAL |
|---|---|---|---|
| Impeller | SS 316L | Front Wear Plate | SS 316L |
| Tee Piece | SG 500/7 | Rear Back Plate | SG 500/7 |
| Air & Water Separator | SG 500/7 | Pump Shaft | SS 431 / Duplex |
| Pump Casing (Volute) | SG Iron 500/7 | Mechanical Seal | SIC - Viton |
| Back Plate | SG 500/7 | Bearing Housing | FG260 |
| Bell Housing to engine | FG260 | Coupling | SAE 1,2,3 |
| Bell Housing to Volute | FG 260 | Non Return Valve | Cast Iron |