Sovereign Pumps
Leading

Provider Of Dewatering Pumps

Sovereign Pumps
Excellence

in Pumping Industry Since 50 Yrs

Sovereign Pumps
Certified

ISO 9001:2015, CE, IP 68

dewatering pumps

SUBMERSIBLE ELECTRICAL DEWATERING PUMP

SPG254M

25 HP (18.6 Kw)

Applications of Sovereign Submersible Electrical Dewatering Pumps

  • Construction Activities
  • Public utility works
  • Fire fighting Services
  • Hydro Power Station
  • Flooded Basement
  • Ships and shipyards
  • Pre Mining Activities
  • Tunnels & Trenches
  • Open Sumps
  • Water Supply System

6″ (150 mm) Hose Outlet (BSP/NPT/Flange Outlet available on request.)

Options for Impeller MOC:

a) For abrasive and corrosion resistance application impeller are in ASTM A217 Gr. CA15 (SS 410)

b) For Sea water and Corrosive application impeller available on request in ASTM A351 Gr. CF8M (SS 316)

SS 304 Strainer, Outlet, Hardware and SS 431 Rotor Shaft.

Tandem TC/TC mechanical seals enclosed in pressure compensated oil chamber.

Thermal Cutouts are imbedded in motor winding for maximum protection.

Nitrile rubber lined diffuser and wear plate for field adjustment.

For saline environment Zinc Anode are available.

Pumps are also available in complete SS 316 construction.

Pumps are available for any combination of voltage and frequency on request.

The Pump is epoxy coated for long life.

MECHANICAL SEAL

Tandem TC/TC mechanical seals enclosed in pressure compensated oil chamber.


BEARINGS

Upper bearing : Single row deep groove ball bearing.

Lower bearing : Double tandem single row angular contact bearing.


POWER CABLE

For DOL Start

Cable Size: 4 core 6.0 sq.mm + 2 core 1.0 sq.mm

Cable Length : 20 meters


For STAR-DELTA Start

Additional 20 meters long (4core 4.0 sq.mm) cable will be provided .

PVC insulated, water and oil proof copper conductor flexible cable with cable support clamp assembly


STRAINER

Hole Size : 40 x 10 mm

Material of construction : S.S. 304


STANDARD MOC

Impeller : S.S. CA15 , Nitride Hardened to 50-55 HRC

Rotor Shaft : S.S. 431

Diffuser / Wear Plate : NBR Lined

Inner Body : Extruded Aluminum with Epoxy Powder coating

Outer Body : Extruded Aluminum with Epoxy Powder coating

Hardware : S.S 304


ELECRICAL MOTOR (DOL – START)

2 Pole continuous rated induction motor with squirrel cage rotor.

Frequency (Hz) : 50

AC Supply (Phase) : 3

Voltage (V) : 415

Power Rating (Kw) : 18.6

Current Rating (FL) (Amp) : 39

Speed (RPM) : 2850

Motor Winding Insulation Class : H

Max. temp. of pumped Fluid (°C) : 40

Max. Start / Stop per hour : 15


PUMP WEIGHT

Approx. without cable (Kg) : 190


PUMP SUBMERGENCE

Pump submergence below Fluid level minimum 125 mm & maximum 15 meters.


SOLID HANDLING CAPACITY : 10 mm