Provider Of Dewatering Pumps
in Pumping Industry Since 50 Yrs
ISO 9001:2015, CE, IP 68
5 HP (3.7 Kw)
Applications of Sovereign Submersible Electrical Dewatering Pumps
3″ (75 mm) Hose Outlet (BSP/NPT/Flange Outlet available on request)
Options for Impeller MOC:
a) For abrasive and corrosion resistance application impeller are in ASTM A217 Gr. CA15 (SS 410)
b) For Sea water and Corrosive application impeller available on request in ASTM A351 Gr. CF8M (SS 316)
SS 304 Strainer, Outlet, Hardware and SS 431 Rotor Shaft.
Tandem TC/TC mechanical seals enclosed in pressure compensated oil chamber.
Thermal Cutouts are imbedded in motor winding for maximum protection.
Nitrile rubber lined diffuser and wear plate for field adjustment.
For saline environment Zinc Anode are available.
Pumps are also available in complete SS 316 construction.
Pumps are available for any combination of voltage and frequency on request.
The Pump is epoxy coated for long life.
Tandem TC/TC mechanical seals enclosed in pressure compensated oil chamber.
Upper and lower bearing are single row, deep groove ball bearings.
Cable Size: 4 core 1.5 sq.mm + 2 core 1.0 sq.mm
Cable Length : 20 meters
PVC insulated, water and oil proof copper conductor flexible cable with Cable Support clamp assembly.
Hole Size : 6×6 mm
Material of construction : S.S. 304
Impeller : S.S. CA15 , Nitride Hardened to 50-55 HRC
Rotor Shaft : S.S. 431
Diffuser / Wear Plate : NBR Lined
Inner Body : Extruded Aluminum with Epoxy Powder coating
Outer Body : Extruded Aluminum with Epoxy Powder coating
Hardware : S.S 304
2 Pole continuous rated induction motor with squirrel cage rotor.
Frequency (Hz) : 50
AC Supply (Phase) : 3
Voltage (V) : 415
Power Rating (Kw) : 3.7
Current Rating (FL) (Amp) : 8.0
Speed (RPM) : 2850
Motor Winding Insulation Class : H
Max. temp. of pumped Fluid (°C) : 40
Max. Start / Stop per hour : 15
Approx. without cable (Kg) : 53
Pump submergence below Fluid level minimum 85 mm & maximum 15 meters.