Provider Of Dewatering Pumps
in Pumping Industry Since 50 Yrs
ISO 9001:2015, CE, IP 68
8 HP (6 Kw)
SUBMERSIBLE ELECTRICAL
NON CLOG / SLURRY PUMP
FOR ABRASIVE APPLICATION
AND CORROSIVE APPLICATION
4″ (100 mm) Hose Outlet (Flange outlet available on request.)
Options for Impeller MOC:
a) For abrasive and corrosion resistance application impeller are in ASTM A217 Gr. CA15 (SS 410)
b) For Sea water and Corrosive application impeller available on request in ASTM A351 Gr. CF8M (SS 316)
SS 304 Strainer, Outlet, Hardware and SS 431 Rotor Shaft.
Tandem TC/TC mechanical seals enclosed in pressure compensated oil chamber.
Thermal Cutouts are imbedded in motor winding for maximum protection.
Nitrile rubber lined diffuser and wear plate for field adjustment.
For saline environment Zinc Anode are available.
Pumps are also available in complete SS 316 construction.
Pumps are available for any combination of voltage and frequency on request.
The Pump is epoxy coated for long life.
Tandem TC/TC mechanical seals enclosed in pressure compensated oil chamber.
Upper bearing : Single row deep groove ball bearing.
Lower bearing : Double tandem single row angular contact bearing.
Cable Size: 4 core 2.5 sq.mm
Cable Length : 15 meters
PVC insulated, water and oil proof copper conductor flexible cable with cable support clamp assembly.
Impeller : S.S. CA15 , Nitride Hardened to 50-55 HRC
Rotor Shaft : S.S. 431
Wear Plate : NBR Lined
Stator Casing : Extruded Aluminum with Epoxy Powder coating
Pump Volute : S.S. CF8 (S.S. 304) with Epoxy Powder Coating.
Hardware : S.S 304
2 Pole continuous rated induction motor with squirrel cage rotor.
Frequency (Hz) : 50
AC Supply (Phase) : 3
Voltage (V) : 415
Power Rating (Kw) : 6
Current Rating (FL) (Amp) : 14
Speed (RPM) : 2850
Motor Winding Insulation Class : H
Max. temp. of pumped Fluid (°C) : 40
Max. Start / Stop per hour : 15
Approx. without cable (Kg) : 65
Pump submergence below Fluid level minimum 70 mm & maximum 15 meters.