SUBMERSIBLE ELECTRICAL SEWAGE PUMP

MECHANICAL SEAL

Tandem TC/TC mechanical seals enclosed in pressure compensated oil chamber.

BALL BEARINGS

Upper Bearing: Single row, deep groove ball bearing.

Lower Bearing : Double row, angular contact bearing.

POWER CABLE

Cable Size: 7 core 4.0 sq.mm + 2 core 1.0 sq.mm

Cable Length : 15 meters

EPR insulated, water and oil proof copper conductor flexible cable.

IMPELLER

Type : Single Channel

Material : C.I IS210 FG 260

STANDARD MOC

Pump Casing : C.I IS210 FG 260

Rotor Shaft : S.S. 431

Hardware : S.S 304

"O" Rings : Nitrile Rubber

Mech. Seals : TC/TC

MOTOR (DOL – START)

continuous rated, 4-pole induction motor with squirrel cage rotor.

Frequency (Hz) : 50

AC Supply (Phase) : 3

Voltage (V) : 415

Speed (RPM) : 1450

Power Rating (Kw) : 15

Current Rating (FL) (Amp) : 30.6

Max. Temperature of Pumped Fluid (°C) : 40

Max. Starts/Stop Per Hour : 15

PUMP DIMENSIONS

Pump height (mm) : 1030

Pump width (mm) : 890

PUMP WEIGHT

(S - Type) Approx. without cable (Kg) : 310

(P - Type) Approx. without cable (Kg) : 385

PUMP SUBMERGENCE

Pump submergence below Fluid level maximum 10 meters.

SOLID HANDLING CAPACITY : 100 mm

SURFACE TREATMENT

Primer with Epoxy and black choleric paint for long life.